KH-KIPPER as an exhibitor at the German Steinexpo

We would like to invite you to STEINEXPO – the International Demonstration Show for the Construction Materials Industry. It will take place on August 23-26 in the biggest European basalt mine in Homberg, Germany. What distinguishes STEINEXPO from other events are the dynamic machine shows which take place in natural-like conditions. This year KH-KIPPER will once again take part as an exhibitor. We will present the W1MV mining body on the Scania 8×4 chassis.

The W1MV body has been designed to work in the most difficult operating conditions in mines. It is used to transport the excavated material from the mining site to the crusher, it can successfully replace a traditional dump truck after proper preparation of the transport road.

During the transport of high fraction material, it is exposed to constant wear. For the production of the W1MV body, a new generation of wear-resistant steel was used – Hardox 500 Tuf. Modern steel on the floor and sides ensures maximum abrasion resistance of the body and extends the service life of the equipment when working in the mine. The Hardox 500 Tuf wear-resistant steel is the newest product in the Hardox family offering strength, extreme hardness and guaranteed toughness in one and the same wear plate. Hardox 500 Tuf combines the best properties of Hardox 450 and Hardox 500. The result is a wear-resistant steel that has no competition on the market.

The large roof has been installed in such a way as to guarantee the protection of the top profile of the front wall against elements falling from above during loading.

The raised floor in the rear part of the body prevents the load from falling out when driving on slopes. The transported material is additionally secured by the rear wall opened with ropes.

Safe maneuvering and driving a large vehicle is ensured by a rear-mounted reversing camera. The video surveillance system helps the driver see blind spots when reversing by sending a live signal to the in-cab monitor showing everything in the camera’s field of view, including people and obstacles.

The tipper has been also equipped with a heavy-duty HYVA FC hydraulic cylinder, which ensures a short unloading time. This is extremely important for multiple unloading cycles.

The HYVA SMART monitoring system based on cloud operation increases efficiency and safety by providing drivers with real-time data, including such information as truck and unloading data, payload, unsafe unloading position alerts, maintenance alerts and statistics with the number of loading and tipping cycles.

We invite you to KH-KIPPER stand number C27.